Replacement

REMOVAL
1. Remove the right end cover.
2. Remove the right cowl side trim panel and pull the carpeting back, exposing the dash liner.
3. Cut dash liner along the perforated lines and pull back dash liner.

Body Control Module:

4. Remove the screw through oblong access hole at right end of knee blocker.
5. Remove the push-in fastener at the lower leg of the module from underneath the instrument panel and maneuver module down and out. Disconnect the:
- Two wire connectors on the base Body Control Module
- Three wire connectors on the premium Body Control Module
6. Remove Body Control Module from vehicle.

INSTALLATION
- For installation, reverse the above procedures.