Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 1997 >> Sebring Convertible L4-2.4L VIN X >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Balance Shaft >> Service and Repair >> Chain Tensioning
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Chain Tensioning





1. Install chain tensioner loosely assembled.
2. Position guide on double ended stud making sure tab on the guide fits into slot on the gear cover. Install and tighten nut/washer assembly to 12 Nm (105 inch lbs.).
3. Place a shim 1 mm (0.039 inch) thick x 70 mm (2.75 inch) long or between tensioner and chain. Push tensioner and shim up against the chain. Apply firm pressure (5.5 to 6.6 lbs.) directly behind the adjustment slot to take up all slack. Chain must have shoe radius contact as shown.
4. With the load applied, tighten top tensioner bolt first, then bottom pivot bolt. Tighten bolts to 12 Nm (105 inch lbs.). Remove shim.
5. Install carrier covers and tighten screws to 12 Nm (105 inch lbs.).




pro multis · About Operation CHARM