Assembly

NOTE: Use MOPAR Silicone Rubber Adhesive Sealant, or equivalent, on retainer and extension housing/adapter plate to seal to case.

Position Bearing Cone Onto Differential:

1. Using Miller Special Tool L-4410, and C-4171, or equivalents, install differential bearing to differential (extension housing side).
2. Using Miller Special Tool 5052 and C-4171, or equivalents, install differential bearing to differential (bearing retainer side).

Differential Bearing Retainer:

3. Using Miller Special Tool 6061 and C-4171, or equivalents, install differential bearing race to bearing retainer.
4. Using Miller Special Tool L-4520 and C-4171, or equivalents, install differential bearing to extension housing.