Rear Alignment

NOTES:
- Measure wheel alignment with alignment equipment on level ground.
- The rear suspension and wheels should be serviced to the normal condition prior to wheel alignment.





TOE-IN
Adjustment is carried out by turning the toe control arm mounting bolt to the left or right by equal amounts.
- L.H.: Turning clockwise toe-out direction
- R.H.: Turning clockwise toe-in direction
Furthermore, toe adjustment can be made at graduations of approximately 1.3 mm (0.05 inch). The standard value is 3 +/-3 mm (0.12 +/-0.12 inch).

CAMBER
Standard value: -1.33° +/-0.5° (Left/right deviation within 0.5°)

NOTE:
- Camber is preset at the factory and can not be adjusted.
- If camber is not within the standard value, check and replace bent or damaged parts.