Door Opening Weatherstrip

DOOR OPENING WEATHERSTRIP

REMOVAL

1. Remove door opening sill plate. Refer to Trim Panel.

Fig. 1:

2. Pull body mounted weatherstrip from fence around door opening (Fig. 1).

INSTALLATION

1. Position color dot on weatherstrip at the B-pillar upper corner.
2. Engage weatherstrip on the fence at upper B-pillar and work down the B-pillar.
3. Engage weatherstrip along the header and down the A-pillar.
4. Engage weatherstrip along the sill. There may be slack material work it to the front of the opening.
5. Verify weatherstrip sealing.