Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2004 >> Pacifica V6-3.5L VIN 4 >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Impact Sensor >> Service and Repair >> Side Impact Sensor >> B-Pillar
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

B-Pillar

REMOVAL
1. Open hood, disconnect and isolate the battery negative cable.
2. Wait two minutes for the system reserve capacitor to discharge before beginning any system or component service.
3. Remove the B-pillar lower trim for the side of the vehicle that you are replacing the side impact sensor.

First Row Side Impact Sensor - Remove/Install:




4. Remove the two retaining screws to the impact sensor.
5. Disconnect the electrical connector from the impact sensor and remove from vehicle.

INSTALLATION
1. Position sensor in vehicle.
2. Connect the electrical connector.
3. Install the two retaining screws to the impact sensor. Torque screws to 7 Nm (62 in. lbs.).
4. Install the B-pillar lower trim for the side of the vehicle that you are replacing the side impact sensor.

WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE FIRST. FAILURE TO DO SO COULD RESULT IN OCCUPANT PERSONAL INJURY OR DEATH.

5. Verify vehicle and system operation.
6. Close hood.

pro multis · About Operation CHARM