License Plate Lamp Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove screws attaching license plate lamp to rear bumper fascia.

License Plate Lamp Bulb:

3. Remove license plate lamp.
4. Rotate socket counterclockwise one quarter turn.
5. Pull socket from back of lamp.
6. Pull bulb from socket.

INSTALLATION
1. Place bulb into socket.
2. Push socket into back of lamp.
3. Rotate socket clockwise one quarter turn.
4. Install license plate lamp.
5. Install screws attaching license plate lamp.
6. Connect battery negative cable.