B2207

B2207-OCCUPANT RESTRAINT CONTROLLER INTERNAL 1

- When Monitored:
With the ignition on. The module's on board diagnostics continuously performs internal circuit tests.

- Set Condition:
This DTC will set if the module identifies an out of range internal circuit.





Diagnostic Test

1. REPLACE OCCUPANT RESTRAINT CONTROLLER
Turn the ignition on.

WARNING: To avoid serious or fatal injury, turn the ignition off, disconnect the battery and wait two minutes before proceeding.

WARNING: If the Occupant Restraint Controller is dropped at any time, it must be replaced. Failure to take proper precautions could result in accidental airbag deployment and serious or fatal injury.



Repair

- Replace the Occupant Restraint Controller.
- Perform *AIRBAG SYSTEM VERIFICATION TEST - VER 1.Airbag System Verification Test