Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Rear Wheel Speed Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Wheel Speed Sensor - Installation







INSTALLATION

CAUTION: Failure to install speed sensor cables properly may result in contact with moving parts or an over extension of cables causing an open circuit. Be sure that cables are installed, routed, and clipped properly.





1. Insert the wheel speed sensor (2) head into the disc brake adapter (1) or drum brake support plate.
2. Install the mounting screw (3) securing the wheel speed sensor in place. Tighten the mounting screw to 12 Nm (105 in. lbs.).




3. Install the routing clips (2) securing the wheel speed sensor to the axle (1) and its trailing arm (3).




4. Install wheel speed sensor cable (2) into the routing clips (4) on the brake hose.
5. Install the speed sensor cable grommet into the retainer on the brake hose bracket (5).




6. Install the speed sensor cable routing clips (3) on the brake tube (6).
7. Connect the wheel speed sensor cable (5) connector at the body wiring harness (1).
8. Install the wheel speed sensor cable connector into the routing clip (2) mounting it to the vehicle's body (4).
9. Lower the vehicle.
10. Perform the Diagnostic Verification Test and clear any faults. Verification Tests
pro multis · About Operation CHARM