Removal

REMOVAL





1. Disconnect the negative battery cable.
2. Remove the throttle control shield.




3. Remove the speed control cable from the throttle body lever.
4. Remove from throttle cable bracket by compressing the retaining tabs on the cable and slide cable out of the bracket.




5. Remove the vacuum line from the speed control servo.




6. Remove the 2 nuts from the speed control servo studs.




7. Push and pull up the speed control servo from the mounting bracket.
8. Unlock and disconnect the electrical connector from the speed control servo.
9. Remove the 2 push clips and discard.
10. Remove the retaining clip holding cable to servo.
11. Remove the cable.