Generator - Removal

2.4L





1. Remove the air cleaner lid, disconnect the inlet air sensor and makeup air hose.
2. Disconnect the negative battery cable.
3. Loosen the upper generator T-bolt lock nut.




4. Raise vehicle on hoist.
5. Remove the right front wheel.
6. Remove the accessory drive splash shield.




7. Remove the pencil strut (1).




8. Loosen the lower pivot bolt (1).
9. Loosen the accessory drive belt T-bolt.




10. Unplug field circuit connector (1) from generator.
11. Remove the B+ terminal nut (2) and B+ terminal.




12. Remove the generator belt, Accessory Drive Belt - Removal.
13. Remove axle shaft, Half Shaft - Removal.
14. Remove the generator lower mounting bolt and nut from the upper T-bolt.
15. Remove generator from vehicle.