Removal

REMOVAL






MOTOR-FRONT DOOR WINDOW






1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel.Front Door Trim Panel - Removal.
3. Disconnect the electrical connector.
4. Remove the mounting fasteners.
5. Remove the window motor.


MOTOR-SLIDING DOOR WINDOW






1. Disconnect and isolate the battery negative cable.
2. Remove the sliding door trim panel.Removal.
3. Disconnect the electrical connector.
4. Remove the mounting fasteners.
5. Remove the window motor.


MOTOR-VENT WINDOW






1. Disconnect and isolate the battery negative cable.
2. Remove D-pillar trim panel.Removal.
3. Disconnect wire connector (1) from power vent motor (3).
4. Using a flat bladed tool, carefully lift the circular actuator link tab (5). Remove link (4) from window ball socket (4).Removal.
5. Remove bolts (2) holding power vent motor to D-pillar.
6. Remove power vent motor.