No Response From the Module

WHEN TRYING TO PROGRAM THE REMOTE ENTRY RECEIVER IN THE VEHICLE WITH A NEW TRANSMITTER AND THERE IS NO RESPONSE FROM THE MODULE,

(1) Be sure that the remote entry receiver has a battery feed from the fuse 7 (25 amp) cavity A of the black connector. Also affected would be the cigar lighter and the data link connector.

(2) Be sure that the receiver has an ignition feed from fuse 8 (5 amp) in cavity F of the blue connector. Also affected would be the instrument panel gauges.

(3) Be sure that the module has a ground cavity H of the black connector.

(4) Be sure that you are supplying a good ground to the programming wire.

(5) If the above circuits are OK, replace the receiver.