Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2007 >> Nitro 2WD V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Cover >> Service and Repair >> Cover-Front Timing Belt >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION




1. Exchange the accessory drive belt pulley if necessary. Tighten bolt to 61 Nm (45 ft.lbs.).
2. Install upper front timing belt cover.
3. Install lower timing belt front cover.
4. Tighten the timing cover bolts as follows:

- M6 bolts - 12 Nm (105 in.lbs.)
- M8 bolts - 28 Nm (250 in.lbs.)
- M10 bolts - 54 Nm (40 lbs.ft.)

5. Install power steering pump fasteners. Tighten bolts to 23 Nm (200 lbs. in.).
6. Install crankshaft damper.
7. Install accessory drive belt tensioner. Torque fastener to 28 Nm (250 in. lbs.).
8. Install accessory drive belt.
9. Lower vehicle.
10. Connect negative battery cable.
pro multis · About Operation CHARM