Valet Key - Cutting Procedure

90AMCJEEP06
NO.: 23-61-90

GROUP: BODY

DATE: Nov. 5, 1990
SUBJECT: Cutting a Valet Key For a Talon or Summit
MODELS: 1990-91 BD - Talon 1988-91 B2 - Summit (Vehicles built on or after May 1, 1988)



DISCUSSION:

A procedure for cutting a valet key for the listed models has been developed and is illustrated below.


PARTS:

1 Key Blank MB543052


PROCEDURE:

1. Set the key code on the key cutter (curtis product) and cut the notches in the key blank.

2. To make a valet key from the newly cut key, use a small file or stationary grinder to carefully cut out the hatched section shown in the illustration and remove all burrs.