Wiper Motor: Service and Repair

Fig. 8 Replacing Wiper Transmission (Front):

Removal Of Wiper Motor:

FRONT
NOTE: Remove front windshield wiper motor and transmission in numbered sequence, noting the following:
1. Mark position of wiper arms before removal.
2. When mounting wiper arms check identification marks. DR indicates driver side, As indicates passenger side.
3. Install wiper arm to pivot shaft so when in stop position wiper blades will be 1 inch from deck garnish.
4. Reverse procedure to install.

Fig. 9 Replacing Wiper Transmission (Rear):

REAR
NOTE: Remove rear windshield wiper motor and transmission in numbered sequence, noting the following:
1. Using plastic trim tool, remove clip mounting areas on back of liftgate, then remove trim.
2. Install grommet with arrow positioned up.
3. Install wiper arm to pivot shaft so that blade will stop 1 inch from end liftgate glass.
4. Reverse procedure to install.