Operation CHARM: Car repair manuals for everyone.
Home >> Eagle >> 1996 >> Summit Wagon AWD L4-2350cc 2.4L SOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Subassembly Service >> Transfer Case Sub-Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transfer Case Sub-Assembly

1. Remove transfer cover.

Fig.74 Transfer Case Subassembly:





2. Remove O-ring, spacer and outer race.
3. Remove drive bevel gear assembly, spacer and oil seal.
4. Reverse procedure to assemble, noting the following:
a. Use oil seal installer MD998323 or equivalent when installing oil seal.
b. Using preload socket tool No. MB990326 and side gear holding tool No. MB990900, or equivalents, check turning torque of the drive bevel gear assembly as shown. If turning torque is not within 1.23-1.81 ft. lbs., adjust by installing new spacers. Select spacers of nearly same thickness on both sides.

Fig.75 Turning Drive Torque Of Drive Bevel Gear Assembly Check:




pro multis · About Operation CHARM