Operation CHARM: Car repair manuals for everyone.
Home >> Eagle >> 1997 >> Vision V6-3.5L VIN F >> Repair and Diagnosis >> Lighting and Horns >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lighting and Horns: Service and Repair

Front Lamp Module Replacement - LH/D-L-X

REMOVAL
1. Release hood latch and open hood.
2. Remove front bumper fascia.

Front Lamp Module:




3. Remove screws holding bottom of lamp module to radiator closure panel.
4. Remove screws holding top of lamp module to radiator closure panel.
5. Separate lamp module from radiator closure panel.
6. Disengage wire connectors from bulb sockets on back of lamps.
7. Separate lamp module assembly from vehicle.

INSTALLATION
1. Place lamp module assembly in position on vehicle.
2. Engage wire connectors into bulb sockets on back of lamps.
3. Place lamp module in position on radiator closure panel.
4. Install screws to hold top of lamp module to radiator closure panel.
5. Install screws to hold bottom of lamp module to radiator closure panel.
6. Install front bumper fascia.
7. Verify headlamp alignment and calibrate bubble level. Refer to Headlamp Alignment procedures.
pro multis · About Operation CHARM