Wiper Blade Element

REMOVAL
1. Lift wiper arm to raise blade off glass.

Wiper Blade And Element:

Remove Blade From Arm:

2. Remove blade assembly from arm by pushing release tab under arm tip and slide blade away from arm tip. Gently place wiper arm tip on glass surface.
3. To remove wiping element from blade assembly:

Windshield Wiper Blade Element:

- Pull stopper, of the rubber element, out of the end claw together with vertebra (metal rails).
- Remove wiper element and vertebra by sliding them out of the claws.

INSTALLATION
- For installation reverse the above procedures. Check that the element and vertebra is through all claws and the final claw is locked in the stopper. The right blade, the vertebra is curved to match the shape of the wind-shield. Install the vertebra with the curve down.