Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Switch: Service and Repair

INSTRUMENT PANEL MOUNTED
1. Remove heater control assembly as outlined previously, but do not disconnect control cables from assembly.
2. Using a small screwdriver, gently pry knob from blower switch.
3. Working from back of control assembly, disconnect blower switch electrical connector.
4. Remove blower switch to control assembly attaching screws, then the blower switch.
5. Reverse procedure to install.

Fig. 9 Rear Blower Switch:






AUXILIARY HEATER & A/C REAR MOUNTED
1. Disconnect battery ground cable.
2. Using a small screwdriver, gently pry knob from blower switch, Fig. 11.
3. Remove ash tray bezel attaching screws, then the bezel.
4. Disconnect wire harness electrical connector from blower switch.
5. Remove blower switch attaching screws, then the blower switch.
6. Reverse procedure to install.