Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair




Removal
1. Remove distributor, then 2 module attaching screws.
2. Pull right hand side of module down distributor mounting flange, then back up to disengage terminals from connector distributor base.
3. Pull toward flange and away from distributor to remove. Do not attempt to lift from mounting surface before moving entire TFI-IV module toward distributor flange, as connector pins will be damaged.

Installation
1. Apply a 1/32 inch coating of silicone grease to metal base of module. Position module on distributor mounting flange.
2. Carefully position module toward distributor bowl and securely engage the 3 distributor connector pins.
3. Install 2 module attaching screws and Torque to 15-35 inch lbs. Install distributor.