Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1990 >> Probe L4-133 2.2L SOHC >> Repair and Diagnosis >> Powertrain Management >> Technical Service Bulletins >> Recalls >> Campaign - Fuel Pump/Sender Modification >> Attachment III-A - Tech. Instruct- 1989-92 Non-Turbo Probe
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Attachment III-A - Tech. Instruct- 1989-92 Non-Turbo Probe

Fuel Pump/Sender Jumper Wire Modification Instructions

SERVICE PART NUMBER F4CZ-14406-A KIT CONTENTS

ENGINEERING PART NUMBER DESCRIPTION QUANTITY

Jumper Harness 1

Tie Strap 1

I.S. 8156 Instruction Sheet 1

Affected Vehicles:
1989/90/91/92 Non-Turbo engine equipped Probes.

Technical Instructions

1. Open doors. Connect Rotunda Memory Saver 014-R1064 to retain memory in radio settings, engine learn strategies, etc.

2. Open hood and disconnect battery negative cable.

3. Position both front seats forward.





4. Using a screwdriver, disengage rear seat latches and remove rear seat cushion and pad from vehicle. See Figure 1.





5. Disconnect fuel pump electrical connector. See Figure 2.

6. Connect jumper harness F4CA-14406-A to fuel pump connector and to vehicle wiring harness.





7. Coil and tie-strap the jumper harness to the vehicle wiring harness. See Figure 3.

8. Install pad and rear seat cushion. Ensure latches are properly engaged.

9. Connect battery negative cable and close hood.

10. Disconnect Rotunda Memory Saver.

11. Verify engine operation.
pro multis · About Operation CHARM