Windshield Wiper Switch

Windshield Wiper Switching

Interval

The wiper switch is located in the knob at the end of the turn signal lever. To operate the wiper, the key lock cylinder must be in the RUN position. In addition to OFF, there are two fixed speed wiper positions LO (low) HI (high) and an interval position. The positions are selected by rotating the knob actuator relative to the turn signal lever. If interval position is selected, the time between wiper cycles will decrease as the knob is rotated away from OFF position and will increase as the knob is rotated toward OFF position. The time interval between wipes will vary depending on the knob's position from OFF position. The wiper speed for interval wiper operation is fixed at the LO speed setting.