Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair

REMOVAL

Electronic Control Assembly (ECA):






1. Disconnect the negative battery cable.
2. Remove the trim panels on the sides of the floor console under the instrument panel.
3. Remove the ventilation duct located in front of the Electronic Control Assembly (ECA).
4. Remove the ECA mounting bolts and nut.

Electronic Control Assembly (ECA):






5. Disconnect the ECA electrical connectors.
6. Remove the nut from the fuel pump relay bracket and separate the relay from the ECA.

Electronic Control Assembly (ECA):






INSTALLATION
1. Place the ECA into its mounting position.
2. Install the ECA mounting bolts and nut.
3. Connect the ECA electrical connectors.
4. Position the fuel pump relay and install the bracket attaching nut.
5. Install the ventilation duct located in front of the ECA.
6. Install the trim panels on the floor console under the instrument panel.
7. Connect the negative battery cable.