Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Switch: Service and Repair

1. Disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. remove four nut and washer assemblies retaining the airbag module to steering wheel.
3. Disconnect airbag electrical connector from clockspring contact connector.
4. Remove airbag module from steering wheel. Place airbag module on bench with trim cover facing up.
5. Using a small screwdriver, remove horn buttons by gently prying upward.
6. Disconnect horn wiring harness connector.
7. Remove Phillips head screws from speed control switch assemblies.
8. Disconnect speed control switches from wiring harness, then remove switches.
9. Reverse procedure to install. Torque airbag retaining nuts to 3-4 ft. lbs.
10. Reactivate airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.