Shift Linkage: Adjustments

ADJUST
1. Place selector lever in Overdrive position, then hang a 3 pound weight on end selector lever.
2. Raise and support vehicle.
3. Release lock tab on top side of cable by pushing down on two tangs, then disconnect shift cable from manual lever.
4. On Explorer and Ranger models, position manual lever in Overdrive position by moving lever all the way rearward (counterclockwise), then forward three detents (clockwise).
5. On Aerostar models, position manual lever all the way forward (counterclockwise), then rearward three detents (clockwise).
6. On all models, connect shift cable to manual lever, then completely push down lock tab, ensuring it fully engages.
7. Ensure shift cable is clipped to floorpan, then lower vehicle.
8. Adjust shift indicator pointer while transmission is still in Overdrive position.
9. Remove weight from selector lever, then check for proper engagement of all gears, including Park.