Toe

Fig. 4 Marking Position Of Tie Rod, Tie Rod End & Jam Nut:

1. Ensure that tires are properly inflated, then position vehicle on suitable alignment rack.
2. Bounce vehicle several times to normalize ride height, then check toe setting. If toe setting is not within specification, proceed to next step.
3. Mark relationship between tie rods, tie rod ends and jam nuts, then loosen tie rod boot clamps to prevent twisting or damage to boots, Fig. 4.
4. Adjust toe-in by turning both tie rods in or out an equal amount until toe setting is within specification.
5. After adjustment is completed, tighten jam nuts and boot clamps.