Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oxygen Sensor: Service and Repair

*** THIS ARTICLE REFLECTS CHANGES MADE BY TSB #93236, DATED NOVEMBER 10, 1993

REMOVAL

1. Disconnect negative battery cable.

2. Disconnect sensor electrical connector.

3. Using a suitable wrench, remove sensor.

INSTALLATION

1. Install sensor. Tighten to 22 - 36 ft lb (29 - 49 Nm).

2. Plug in electrical connector.

3. Connect negative battery cable.