Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1992 >> Mustang L4-140 2.3L SOHC >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Safing Sensor >> Service and Repair >> Convertible
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Convertible

Removal

WARNING: THE ELECTRICAL CIRCUIT NECESSARY FOR SYSTEM DEPLOYMENT IS POWERED DIRECTLY FROM THE BATTERY. TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE POSITIVE BATTERY CABLE MUST BE DISCONNECTED PRIOR TO SERVICING OR REPLACING ANY SYSTEM COMPONENTS.

1. Disconnect positive battery cable.
2. Remove rear seat cushion.
3. Remove quarter panel trim panel.
4. Remove two screws retaining rear sensor to B-pillar.
5. Remove rear sensor from inside B-pillar.
6. Disconnect the rear sensor wiring connector from wiring assembly connector and remove sensor.





Installation
1. Connect rear sensor wiring connector to wiring assembly connector.
2. Position sensor to inside of B-pillar. Install retaining screws. Tighten to 6.8-9.2 Nm (61-81 lb-in).
3. Connect sensor electrical connector.
4. Install quarter panel trim panel. Install rear seat cushion.
5. Connect positive battery cable.
6. Verify air bag indicator.
pro multis · About Operation CHARM