Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1992 >> Probe L4-133 2.2L SOHC Turbo >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair

REMOVAL
1. Disconnect negative battery cable.
2. Remove high tension lead from coil terminal.

Ignitor Wiring Harness.:





3. Disconnect ignitor wiring harness.
4. Remove the two bracket nuts and lift ignition coil and ignitor assembly.

Ignition Coil And Ignitor Assembly:





5. Slide protective cover back and disconnect ignition coil and noise suppressor wiring harness.
6. Remove the noise suppressor.

Ignitor Module And Ignition Coil Assembly:





7. Remove two screws, the ignitor module, bracket, and ignition coil.

INSTALLATION
1. Install ignitor module, bracket and coil on coil mounting bracket and tighten screws.
2. Install noise suppressor.
3. Connect ignition coil and noise suppressor wire harness. Slide protective covering over connector.
4. Install coil and ignitor assembly.
5. Connect ignitor wiring harness.
6. Install high tension lead into coil center terminal.
7. Connect negative battery cable.
pro multis · About Operation CHARM