Preliminary/Visual Inspection

1. Visually inspect the 4EAT from above and below the vehicle. Look for:

MECHANICAL
- Proper fluid level.
- Fluid leaks.
- Loose engine or transmission mounts.
- CV joints and halfshaft loose, worn or damaged.
- Shift linkage binding or damaged.
- Front brakes for excessive wear or damage.
- Tire pressure.

ELECTRICAL
- Blown fuses.
- Stretched, open or damaged wiring.
- Corroded or loose connectors.

2. Check accelerator linkage and throttle valve linkage for freedom of travel.

3. Shift the selector lever manually through all ranges to check for ease of movement, obvious binding or bad adjustment.

4. Check the oil cooler (mounted in front of the radiator) for free air flow and fluid leakage.

5. If the "MANUAL" light on the Instrument Panel is on constantly, refer to the 4EAT Quick Test Procedure.

6. Drive the vehicle to verify the customer complaint.