Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1992 >> Taurus V6-182 3.0L DOHC SHO >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

REMOVAL





1. Disconnect battery ground cable.
2. Disconnect both electrical connectors at ignition module assembly by pressing down on locking tabs where it is stamped PUSH and remove connector.
3. Remove module retaining bolts and remove module.

INSTALLATION

1. Apply an even coat of approximately 0.80mm (1/32 in) of silicone dielectric compound or equivalent to mounting surface of ignition module. Install module and retaining bolts. Tighten bolts to 22-31 in lb (2.4-3.5 Nm).
2. Connect both electrical connectors to module.
3. Connect battery ground cable.
pro multis · About Operation CHARM