Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1992 >> Taurus V6-232 3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Pressure Sender >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Pressure Sender: Service and Repair





Removal

1. Remove washer solvent/coolant recovery bottle.
2. Release drive belt tension and position drive belt aside.
3. Remove belt idler pulley below power steering pump.
4. Disconnect wire from oil pressure switch and remove switch using Removal/Replacer Tool T87L-9278-A or equivalent.

Installation

1. Apply Pipe Sealant with Teflon(r) D8AZ-19554-A or equivalent to threads of oil pressure switch. Install switch using Removal/Replacer Tool T87L-9278-A or equivalent. Tighten to 11-24 Nm (8-18 lb ft).
2. Install idler pulley. Tighten bolt to 70-95 Nm (52-70 lb ft).
3. Install drive belt.
4. Install washer solvent/coolant recovery bottle. Top off fluids.
5. Start engine and check for leaks.
pro multis · About Operation CHARM