Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1992 >> Taurus V6-232 3.8L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Impact Sensor >> Service and Repair >> Center Cowl Crash Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Center Cowl Crash Sensor


WARNING: THE ELECTRICAL CIRCUIT NECESSARY FOR SYSTEM DEPLOYMENT IS POWERED DIRECTLY FROM THE BATTERY. TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BATTERY POSITIVE CABLE MUST BE DISCONNECTED PRIOR TO SERVICING OR REPLACING ANY SYSTEM COMPONENTS.

NOTE: To service stripped sensor retaining screws at the rear sensor, use screw (Part No. N806327-S 190). Tighten to 4.5 - 6.1 N.m (40-54 lb-in).






Removal
1. Disconnect battery positive cable.
2. Remove two screws retaining rear sensor to LH cowl side and remove sensor.
3. Disconnect the rear sensor wiring connector from wiring assembly connector and remove sensor.

Installation
1. Connect rear sensor wiring connector to wiring assembly connector.
2. Position sensor to center cowl panel and secure with retaining screws. Tighten to 10.2-13.8 N.m (91-122 lb-in).
3. Connect battery positive cable.
4. Verify air bag indicator.
pro multis · About Operation CHARM