Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1993 >> Probe V6-152 2.5L DOHC >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Safing Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Safing Sensor: Service and Repair

Removal

WARNING: THE BACKUP POWER SUPPLY ENERGY MUST BE DEPLETED BEFORE ANY AIR BAG COMPONENT SERVICE IS PERFORMED. TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE NEGATIVE BATTERY CABLE AND WAIT ONE MINUTE.





NOTE: The safing sensor is mounted on the bulkhead behind the floor console.

1. Disconnect the negative battery cable.
2. Remove the LH and RH floor console side panels.





3. Disconnect the safing sensor electrical connectors.
4. Remove the two safing sensor bolts.
5. Remove the safing sensor.

Installation
1. Position the safing sensor with the arrow on the sensor facing toward the front of the vehicle and install the safing sensor bolts. Tighten the two safing sensor bolts to 7-9 Nm (61-86 lb-in).
2. Connect the safing sensor electrical connectors.
3. Install the LH and RH floor console side panels.
4. Connect the negative battery cable.
5. Verify that the air bag lamp is operative.
pro multis · About Operation CHARM