Service Notes

WARNING: ALL ANCHOR BOLTS MUST BE TIGHTENED TO 38-78 Nm (28-58 LB-FT). FAILURE TO TIGHTEN ANCHOR BOLTS TO SPECIFICATION MAY INCREASE THE CHANCE AND/OR SEVERITY OF INJURY IN THE EVENT OF AN ACCIDENT.

CAUTION: Belt assemblies must be installed in matched sets as received and must not be interchanged between vehicle models.

If a component portion (buckle, retractor, etc.) of a seat belt is non-functional or damaged, the entire assembly (buckle, tongue, and retractor portions) must be replaced. The replacement assembly must be installed as a matched set and the manufacturer's identification on the label of the retractor webbing must match the manufacturer's identification on the buckle base.