Main (Front)

REMOVAL AND INSTALLATION
1. Drain cooling system.
2. Remove the heater water hoses from the heater core in the engine compartment using Quick Disconnect tool T85T-18539-AH, and plug hoses.
3. Remove modesty panel which runs along the lower edge of the instrument panel (04320).

Fig. 7 Heater Core Replacement:

4. Remove the six screws from the heater core cover (18B300) Fig. 7. located on both sides of the heater assembly case.
5. Remove heater core cover.
6. Remove heater core and heater core case seal (18658) from the heater assembly.
7. Reverse procedure to install, refill cooling system.