Intake Manifold: Service and Repair

1. Relieve fuel system pressure.
2. Disconnect battery ground cable and drain coolant system.
3. Remove air intake tube.
4. Disconnect fuel injector harness from EEC harness.
5. Disconnect crankshaft position sensor.
6. Disconnect fuel supply and return lines.
7. Disconnect camshaft position sensor.
8. Remove throttle and kickdown cables from throttle lever.
9. Remove throttle cable bracket.
10. Remove power brake vacuum supply and PCV hoses.
11. Remove vacuum hose from bottom of throttle body.
12. Remove nuts from intake manifold.
13. Remove intake manifold from vehicle.
14. Reverse procedure to install. Torque intake manifold to 12-15 ft lb.