PC5
1. Using Rotunda(r) Super Star II Tester 007-0041B or equivalent:
- Key in RUN.
- Read out and record all diagnostic trouble codes.
NOTE: Be sure to read out and record all codes. Failure to do so may result in improper diagnosis and unnecessary repairs. After first code, the remaining codes will follow in 15-second intervals. Leave STAR Tester HOLD/TEST button in the TEST position.
2. Using 12V test light or ABS warning light:
- Key in RUN.
- Count flashes.
NOTE: Digits will be separated by 3-6 seconds. Diagnostic trouble codes will be separated by 15 seconds.
- Record all codes. When flashing stops there are no codes remaining.
- Remove jumper in ABS test connector.
- Are there any codes present?
YES -- (Other than Code 16).Starting with the first code recorded, Go to the pinpoint test for that code. Diagnostic Trouble Code Descriptions
YES -- (Code 16). If previous action has been taken, concern most likely has been corrected and ABS system is OK. Otherwise, Go to Symptom Chart F. F - ABS Warning Light on Intermittently With System Pass/Code 16
NO -- No code is obtained. Go to Pinpoint Test S. S Hard Light No DTC