Disc Brake System: Diagrams

Item Part Number Description

1. 3105 Spindle Assembly (RH)
2. 2B121 Front Disc Brake Caliper
3. 2C150 Caliper Pin
4. 2B160 Front Brake Splash Shield Gasket
5. 2K005 Front Disc Brake Rotor Shield
6. N611171-S2 M6-1.0 x 10 Screw. Tighten to 7-10 Nm (62-89 in lb)
7. 1190 Grease Seal
8. 1201 Front Wheel Bearing Inner Cone and Roller
9. 1102 Front Disc Brake Hub and Rotor
10. 1216 Front Wheel Bearing Outer Cone and Roller
11. 1195 Washer
12. 374504-S100 Nut, 3/4-16
13. 390622-S Nut Retainer
14. N642569-S36 Cotter Pin, must be installed as shown
15. 1131 Hub Grease Cap
16. 2B164 Brake Shoe Hold Down Spring, must be installed on lower end of inner shoe only, with loop facing away from rotor.

NOTE: Install caliper pin so retention tabs are in contact with spindle, not caliper.