Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1994 >> Mustang V6-232 3.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Pinpoint Tests >> H - Fuel Control >> H23 - Check of HO2S Circuit Wiring With PCM Connected
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

H23 - Check of HO2S Circuit Wiring With PCM Connected



- Key Off.

- PCM connected.

- Suspect HO2S disconnected.

- Jumper HO2S Signal to VPWR at the HO2S harness connector.

- Scan Tool connected.

- Key On, Engine Off.

- Access the correct HO2S PID.

NOTE: (HO2S displayed as 02S on Scan Tool.)

- Is the voltage greater than 3.50 volts?

YES -- HO2S signal circuit is not faulty. REPLACE HO2S, change oil/filter, COMPLETE PCM reset to clear DTCs. COMPLETE a HO2S monitor drive cycle.

NO -- Go to H24. H24 - Check Resistance of HO2S Signal Circuit
pro multis · About Operation CHARM