Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

TG94 - Check For DTC 0705 Generated With DTC 0708

DTC 0708 indicates the MLP sensor circuit voltage was above the allowed maximum value.

Possible causes:
- Damaged MLP sensor.
- Open in MLP harness SIG RTN circuit.
- Short to PWR in MLP harness SIG circuit.
- Damaged PCM.

- Did DTC 0705 repeat with DTC 0708 during the drive cycle test?

YES -- GO to TG99. TG99 - DTC 0708 Was Generated During the Drive Cycle Test

NO -- GO to TG95. TG95 - Check MLP Sensor Alignment