Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1994 >> Mustang V6-232 3.8L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair

REMOVAL
1. Disconnect battery ground cable.
2. Disconnect engine control sensor wiring connector from ignition coil and radio ignition interference capacitor.
3. Disconnect spark plug wires from ignition coils.

NOTE: When removing wires from ignition coil, squeeze the locking tabs of coil wire retainer by hand. Twist and pull on boot until free.

4. Remove retaining screws and coil assembly.

INSTALLATION
1. Install coil assembly and retaining screws.
2. Tighten to 40-61 lb. in. (4.5-7.0 Nm).
3. Connect ignition wires.
4. Connect engine control sensor wiring connector to coil and radio ignition interference capacitor.
5. Connect battery ground cable.
pro multis · About Operation CHARM