Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1994 >> Ranger 4WD L4-140 2.3L SOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair










REMOVAL
1. Disconnect the wiring harness from the anti-lock electronic control unit by depressing the plastic tab on the connector and pulling the connector off.
2. Disconnect the wiring harness from the IWW module by depressing the plastic tab on the connector and pulling the connector off.

RABS Control Module:





3. Remove the screw and nut that retain the anti-lock electronic control unit and bracket assembly to the instrument panel. Remove the anti-lock electronic control unit and bracket assembly.
4. Remove the screws that retain the anti-lock electronic control unit to the instrument panel bracket. Remove the anti-lock electronic control unit.

INSTALLATION
1. Place the anti-lock electronic control unit in position on the instrument panel bracket. Install and tighten the RABS II module retaining screws.
2. Place the anti-lock electronic control unit and bracket assembly in position in the instrument panel. Install and tighten the retaining nut and screw.
3. Connect the wiring harness to the RABS II and IWW modules.
4. Check the system for proper operation.
pro multis · About Operation CHARM