Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1994 >> Ranger 4WD L4-140 2.3L SOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

REMOVAL
1. Identify, then disconnect electrical connectors from Ignition Control Module (ICM) assembly by pushing down on the connector locking tabs. Tabs are marked PUSH.
2. Remove three retaining screws, then the ICM from the lower intake manifold.

INSTALLATION

NOTE: The ICM mounting surface must be clean.

1. Apply a 1/32 inch coat of silicone dielectric compound to the mounting surface of the ICM.
2. Mount ICM to the intake manifold. Install screws and torque to 22-31 lb. in. (2.5-3.5 Nm).
3. Connect electrical connectors to ignition module.
pro multis · About Operation CHARM