Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair

REMOVAL
1. Disconnect spark plug wires from ignition coil.

NOTE: When removing wires from ignition coil, squeeze the locking tabs of coil wire retainer by hand. Twist and pull on boot until free.

2. Disconnect engine harness electrical connector from ignition coil.
3. Remove four ignition coil assembly retaining screws, then the coil.

INSTALLATION
1. Mount ignition coil to bracket.
2. Tighten retaining screws to specification.
3. Connect engine harness electrical connector to ignition coil.
4. Install spark plug wires.