Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1994 >> Taurus V6-195 3.2L DOHC SHO >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

REMOVAL
1. Disconnect battery ground cable.
2. Disconnect both electrical connectors at ICM assembly by pressing down on locking tabs where it is stamped PUSH, and pulling to remove connector.
3. Remove ICM retaining bolts and remove module.

INSTALLATION

NOTE: The ICM mounting surface must be clean.

1. Apply an even coat of approximately 1/32 inch of silicone dielectric compound or equivalent to mounting surface of ICM.
2. Install ICM, retaining bolts, and torque to 22-31 lb. in. (2.5-3.5 Nm).
3. Connect both electrical connectors to ICM.
4. Connect battery ground cable.
pro multis · About Operation CHARM