Intake Air Duct: Service and Repair

REMOVAL and INSTALLATION

1. Loosen engine air cleaner tube clamps on air cleaner outlet tube or engine air outlet tube.

2. Disconnect crankcase ventilation hose from air cleaner outlet tube fitting.

3. Remove air cleaner outlet tube or engine air outlet tube (depending on application) from mass airflow sensor and throttle body or engine air cleaner.

NOTE: Align white identification mark on air cleaner outlet tube with tube stop on throttle body.

4. To install, reverse removal procedure. Tighten engine air cleaner tube clamps to 1.4-2.5 Nm (12-22 lb in).