Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

Powertrain Control Module:






REMOVE

1. Disconnect battery ground cable.

2. Remove right hand cowl side trim panel to expose Powertrain Control Module (PCM).

3. Loosen engine control sensor wiring to PCM connector retainer bolt.

4. Remove engine control sensor wiring connector from PCM.

5. Remove PCM from powertrain control module bracket (PCM bracket) by pulling powertrain control module downward.

INSTALL

Reverse Removal procedure. Tighten engine control sensor wiring connector retainer bolt to 3.7 Nm (32 in lb).