Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1995 >> Crown Victoria V8-281 4.6L SOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement






REMOVAL
1. Disconnect battery ground cable.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the adaptive strategy.

2. Remove PCM electrical connector retainer bolt.
3. Remove engine control sensor wiring connector from PCM.
4. Remove PCM bracket clip.
5. Remove PCM.

INSTALLATION
1. To install, reverse removal procedure.
2. Tighten PCM electrical connector retainer bolt to 3.7 Nm (32 in lb).

pro multis · About Operation CHARM